Laserfiche WebLink
(2) By licensed construction contractors, electricians., or <br /> plumbers, respectively, of the [county] state in which the <br /> factory is located. [if the manufacturer does not submit a <br /> quality control manual which is approved by the building <br /> official; <br /> (a) For each model of FBH, three sets of plans and specifications <br /> shall be submitted and approval obtained prior to fabrication. <br /> (b) With each application for a building permit, three sets of <br /> be submitted. <br /> a professional architect or structural engineer licensed in the <br /> State of Hawai`i. <br /> L0-178] L101.7 Inspections. <br /> (a) Each and every FBH manufactured outside of[the] this County <br /> shall be inspected by the building official within the [County.] <br /> county in which the FBH was manufactured. <br /> (b) All manufacturing work, including building, electrical, and <br /> plumbing, shall be inspected in the factory by the building <br /> officialk] to ensure compliance with the requirements of the <br /> construction code. It shall be the duty of the permit holder or <br /> their agent, to cause the work to remain accessible and exposed <br /> for inspection purposes. All inspections of FBH shall comply <br /> with sections 5-8-1, 5-8-2, 5-8-3, 5-8-4, 5-8-5, 5-8-6, and 5-8-7. <br /> [L101.9] L101.8 Manufacturer's label. A manufacturer's label on <br /> a metal plate showing the manufacturer's name, serial number of the <br /> building, manufacture date, design load criteria, and [third party] <br /> building official inspection stamp shall be securely fastened on the <br /> [FBB.] FBH. <br /> [L101.10] L101.9 Transporting Factory-Built Housing. The <br /> transportation of FBH shall be governed by the provisions of the <br /> County and State traffic codes." <br /> Due to the extensive length of Bill No. 179, Draft 2, a copy of the revised draft of this bill that <br /> would result if these proposed amendments are adopted is not attached. <br /> VP/lc <br /> 5 <br />