Laserfiche WebLink
Exception: Portions of floors that do not support shear walls, braced wall <br /> panels above, or roofs shall be permitted to extend not more than 6 feet <br /> (1829 mm) beyond a shear wall or braced wall line. See Figure <br /> R301.2.2.6(4). <br /> ROOF OR FLOOR SHALL BE PERMITTED <br /> TO EXTEND UP TO 6'BEYOND <br /> { THE BRACED WALL LINE <br /> La <br /> PLAN VIEW NO BRACED WALL PANEL ABOVE <br /> PERMITTED AT THIS LOCATION <br /> Figure R301.2.2.6(4) <br /> Roof or Floor Extension Beyond Braced Wall Line <br /> 3. Shear wall or braced wall offsets in plane. Conditions where the end of <br /> a braced wall panel occurs over an opening in the wall below and extends <br /> more than 1 foot (305 mm) horizontally past the edge of the opening. This <br /> provision is applicable to shear walls and braced wall panels offset in plane <br /> and to braced wall panels offset out of plane in accordance with the <br /> exception to Item 1. See Figure R301.2.2.6(5). <br /> �� `•`'�•,_ REQUIRED BRACED ,j •,•,� <br /> WALL PANEL <br /> 'i— <br /> -iI <br /> I 1 I '' <br /> } MORE THAN 7'•0" ' <br /> ir <br /> EXTERIOR ELEVATION EXTERIOR ISOMETRIC <br /> Figure R301.2.2.6(5) <br /> Braced Wall Panel Extension Over Opening <br /> Exception: For wood light-frame wall construction, one end of a braced <br /> wall panel shall be permitted to extend more than 1 foot (305 mm) over an <br /> opening not more than 8 feet (2438 mm) in width in the wall below provided <br /> that the opening includes a header in accordance with all of the following: <br /> 1. The building width, loading condition and framing member species <br /> limitations of Table R602.7(1) shall apply. <br /> 2. The header is composed of: <br /> 2.1. Not less than one 2 x 12 or two 2 x 10 for an opening not more <br /> than 4 feet (1219 mm)wide. <br /> 2.2. Not less than two 2 x 12 or three 2 x 10 for an opening not more <br /> than 6 feet (1829 mm) in width. <br /> 20 <br />