ORD 2021-061 2020-2022 - Laserfiche WebLink

Home

which is parked and stationary for any 24-hour period, and is used for business or living purposes; provided, however, that the term shall not include a push cart or push wagon which is readily movable and which does not exceed 25 square feet in area, nor shall the term include a trailer or vehicle, used exclusively for the purpose of selling any commercial product therefrom, which hold a vehicle license and actually travels on public or private streets. To the extent context otherwise permits and/or requires, the definitions of"building" as used in the following chapters of the Hawai`i County Code: 5A, the building code; 5B, the residential building code; 5C, the existing building code; 5D, the electrical code; 5E, the energy conservation code; and 5F, the plumbing code; are incorporated by reference herein." "BUILDING OFFICIAL.[The officer or other designated authority a duly authorized representative. For the definition applicable in Chapter 11, see Section N1101.61 The director of the County department of public works or the director's authorized representative." (5) Subsection R301.1.1, "Alternative provisions," of the International Residential Code is amended to read as follows: "R301.1.1 Alternative provisions. As an alternative to the requirements in Section R301.1, the following standards are permitted subject to the limitations of this code and the limitations therein. Where engineered design is used in lieu of or in conjunction with these standards, the design shall comply with the [International Building Code] the Building Code, Chapter 5A, Hawai`i County Code. 1. AWC Wood Frame Construction Manual (WFCM) 2018. 2. AISI Standard for Cold-Formed Steel Framing—Prescriptive Method for One- and Two-Family Dwellings (AISI 5230 - 2015). 3. [ICC Standard on the Design and Construction of Log Structures (ICC 100).] ICC Standard for Residential Construction in High-Wind Regions (ICC 600-14)." (6) Subsection R301.1.3, "Engineered design," of the International Residential Code is amended to read as follows: "R301.1.3 Engineered design. When a building of otherwise conventional construction contains structural elements exceeding the limits of Section R301 or otherwise not conforming to this code, these elements shall be designed in accordance with accepted engineering practice using the Alternative Provisions listed in R301.1.1. The extent of such design need only demonstrate compliance of nonconventional elements with other applicable provisions and shall be compatible with the performance of the conventional framed system. Engineered design in accordance with the [International Building Code] Building Code, 8