COM 0141.006 2008-2010 - Laserfiche WebLink

Home

Page 8 of 8 Each hydronic system shall have either the ability to measure pressure across the pump, or test ports at each side of each pump. Exception: Pumps with pump motors of 5 hp or less." (14) Amending Section 505.7 Section 505.7 is amended to read: "505.7 Electrical energy consumption. (Mandatory). In buildings having individual dwelling or subtenant units, provisions shall be made to determine the electrical energy consumed by each tenant by separately metering individual dwelling and subtenant units. Tenants shall have ready physical access to meters. Meters shall display kWh consumption and be calibrated in accordance with ANSI C12.1-2008." (15) Amending Chapter 6 Chapter 6, Referenced Standards, is amended by adding the following specifications to the ANSI and ASTM cate oe rieS, to read: "ANSI Standard Referenced reference in code number Title section number C12.1-2008 Electric Meters Code for Electricity Metering .........................505.7 ASTM Standard Referenced reference in code number Title section number E 408-2008 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection Meter Techniques ..................402.1.1.1 45, 402.1.1.1 #6, 402.1.1.1 #8.1.1 3. SECTION 6 of Bill 385, the Ramseyer format clause, is deleted in its entirety as it is unnecessary. All material contained within Bill 385 is proposed for addition; therefore underlining is not needed and can only serve as a distraction for the reader. Subsequent SECTIONS of Bill 385 are renumbered to reflect the deletion of the Ramseyer format clause. A draft of Bill 385, Draft 2, is attached with the proposed amendments contained in this communication incorporated. Thank you. PH/kf Att.