Laserfiche WebLink
is <br /> • I <br /> 9. The 2N1TM glove system shall consist of an integrated nylon film liner glove inside a 35mil butyl glove attached to <br /> the garment with a ring and clamp. The outer glove is Kevlar. <br /> 10. The garment shall contain an internal 2"waist belt system for support and improved fit. <br /> 11. The garment shall be constructed with two(2),one-way exhalation valves.The exhaust valve flappers shall be of <br /> a ridged design.The exhalation valves shall contain a special molded cover to improve vapor intrusion resistance. <br /> Valves shall be protected from splash by valve covers made of the suit material. <br /> 12. Garments are packed one per case. Garments must be packaged in reusable storage bags with carrying handles. <br /> Bags shall have zipper closures and marked with Kappler logo. <br /> 13. Sizes:XS-5X Combination sized garment <br /> Weights: 151bs16.80kg to 21Ibs/9,53kg <br /> Performance Requirements <br /> 1. Garment shall be certified to NFPA 1991, Standard on Vapor-Protective Ensembles for Hazardous Materials <br /> Emergencies,2005 Edition,including optional liquefied gas and chemical flash fire protection. <br /> 2. Garment shall be tested to ASTM F 1930, Test Method for Evaluation of Flame Resistant Clothing for Protection <br /> Against Flash Fire Simulations Using an Instrumented Manikin,and exhibit zero percent body burn during a six <br /> second exposure. <br /> 3. Garment fabric shall be tested to ISO 17492, Clothing for Protection against Heat and Flame, and exhibit a <br /> thermal protective performance(TPP)value of thirty two. <br /> 4. Garment fabric shall be tested to ASTM F 739, Standard Test Method for Resistance of Protective Clothing <br /> Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact,and exhibit no <br /> breakthrough for at least eight hours against a minimum of 150 chemicals. <br /> Service Requirements <br /> 1. The manufacturer shall have the HazMatchc technical information support system that includes an online and <br /> app based software selection program. (. <br /> 2. The garments shall have a breast logo that includes the ChemScanTM QR code that provides real time access to <br /> chemical test data for the fabrics. <br /> 3. The garments shall be manufactured in the USA, <br /> 4. The manufacturer shall have a 24 hour emergency contact number for special response need. <br /> Warning:This information is based on technical data that Kappler believes to be reliable.It is subject to revision as additional knowledge and experience are gained. <br /> The website will contain Kappler's most upto dateproduct information,and customers who receive <br /> pp pamphlets,brochures or other literature should be aware that such •: <br /> "hard copy"information may not be as current as the information on Kappler's website.Customers should also recognize that there are uses,environments and <br /> chemicals for which Kappler products,garments and/or fabrics are unsuitable.It is the responsibility of the user to review available data and verify that standards.Also, <br /> the customer should review all available information on the website to understand the uses-and limitations-on ALL products,gannents and fabrics which Kappler <br /> makes available. <br /> CAUTION:Do not use for fire protection.Avoid open flame or intense heat. <br /> Kappler Inc,•Technical Services Department•Post Office Box 490(Shipping:55 Grimes Dr.)Guntersville,AL 35976 <br /> •Toll Free 1-800-600-4019. 1-256-505-4005•Fax 1-256-505-4151 <br /> •Email:customerservice@kappler.com <br /> Page 2 of 2 <br />