RES 424 Draft 01 2018-2020 - Laserfiche WebLink

Home

feet, shall not exceed fifteen percent (15%) of the total exposed area of the wall, associated with the business on which the sign is displayed, or twenty-two (22) square feet, whichever is less, and a sign on the face of the building for each business conducted on the premises shall not exceed fifteen percent (15%) of the area of the face of the building actually occupied by the business, or twenty-two square (22) feet, whichever is less; and WHEREAS, HCC § 3-58(c), governing signs within the KVSDD, provides that any lettering or symbol, including free-standing letters, shall not exceed nine (9) inches in height; and WHEREAS, HCC § 3-59(a)(4), governing signs within the KVSDD, provides that the top edge of a wall sign shall not exceed nine (9) feet above the grade or finished floor level or one-half (1/2) the height of the wall on which it is located, whichever is less; and WHEREAS, HCC § 3-60(a), governing signs within the KVSDD, provides that only one (1) sign for any business or one (1) sign for any street or vehicular access on which a building has frontage shall be permitted; and WHEREAS, Applicant seeks a variance of the above referenced HCC provisions to construct the following signs, as described in the Application: Sign(s) Variance Sought GR -ID -IA Permit the sign area of a 2 -sided ground sign to be computed by the and GR -ID- measurement of only one of its faces, where the two identical sign faces are IB placed back to back and twenty-four (24) inches apart, which exceeds the twelve (12) inch separation maximum for 2 -sided ground signs whose sign areas are computed by the measurement of only one of its faces (HCC § 3- 5(a)) Permit a 2 -sided ground sign with area of thirty-nine (39) square feet, exceeding the maximum of twenty-two (22) square feet (HCC § 3 )_ 58(a)(2)(13)) Permit twelve (12) inch high sign lettering, exceeding the nine (9) inch maximum (HCC § 3-58(c)) GR -ID -3A Permit the sign area of a 2 -sided ground sign to be computed by the and GR -ID- measurement of only one of its faces, where the two identical sign faces that 3B are placed back to back and twenty-four (24) inches apart, which exceeds the twelve (12) inch separation maximum for 2 -sided ground signs for whose areas are computed by the measurement of only one of its faces -(HCC § 3- 5(a)) Permit three (3) additional ground sign (in addition to Sign GR -ID -1), exceeding the maximum of one (1) ground sign per lot (HCC § 3-6). The four (4) ground signs will be installed as two (2) 2 -sided ground signs. 2