Laserfiche WebLink
Comparison of Bill 194 and Planning’s Bill for Cell Tower Plan Approvals <br />(Note: new provisions / changes to code are underlined yet often paraphrased) <br />Bill 194 Planning’s Bill <br />Section 25-2-74(1) requires a plot plan showing Section 25-2-74(1) requires a plot plan showing <br />the location of the proposed antenna or tower location on the building site of the proposed <br />and all buildings and uses within three hundred antenna or tower. <br />feet thereof. <br /> <br /> <br />Section 25-2-74(2) requires an elevation Section 25-2-74(7) requires a statement <br />drawing of the building site showing height providing the reasons for the location, design <br />comparisons of all existing structures on and height of the of the proposed tower or <br />building site <br /> the adjacent landowners regarding plan. <br />Section 25-2-74(3) requires building plans for Section 25-2-74(2) requires building plans for <br />the <br />engineer, stating the maximum load of the engineer, will have a hard survivability of 130 <br />tower, will have hard survivability of 100 miles miles per hour. <br />per hour, or the applicable standard set forth in <br />the current building code, whichever is greater. <br /> <br />Section 25-2-74(5) Removes a provision Section 25-2-74(3) Keeps the original provision <br />requiring a statement from the Federal requiring a statement from the Federal <br />Communications Commission that the Communications Commission that the <br />application complies with the regulations and application complies with the regulations and <br />that no such compliance is necessary and that no such compliance is necessary. <br />replaces that with requiring a report prepared <br />by a person who is licensed in the State of <br />Hawai‘i as a professional electrical engineer <br />certifying that the proposed use complies with <br />all applicable standards and regulations, <br />including those related to radio frequency <br />emissions, of the Federal Communications <br />Commission and the State of Hawai‘i <br /> <br />Section 25-2-74(6) requires electrical drawings Has no such provision. <br />equipment, prepared, designed and stamped <br />by a person who is licensed in the State of <br />Hawai‘i as a professional electrical engineer. <br /> <br /> <br /> <br /> <br /> <br /> <br />