Residential Building Permit checklist

Home

County of Hawaii, Department of Public Works Building Division Residential Building Permit Checklist SUBMITTAL REQUIREMENTS: MUST BE DRAWN TO SCALE AND NOTE THE PAGE DIMENSIONED. CHECK EACH BOX. ❑ FRAMING PLANS AND SECTIONS FOR EACH FLOOR. ❑ Design Information: ❑ Floor Live Load psf ❑ Basic wind speed mph ❑ Wind Exposure Category ❑ Roof Live Load psf ❑ Effective Wind Speed mph mph ❑ Seismic Design Category ❑ Floors, Walls, and Roofs layout and dimensions for structural members (joists, beams, rafter, header sizes, spacing, bearing, connection details, attic ventilation, insulation). ❑ Framing member vertical dimension to earth. ❑ Diaphragms: type and thickness of sheeting, span rating, and nailing requirements, ❑ Shear/Braced Walls: location and widths, type/thickness of sheathing, nailing/bolting requirement, strut/cord details. ❑ A complete load path: type, placement and amount of connectors, roof strapping, and fasteners. ❑ Pre -Engineered Roof Trusses (options): ❑ Truss shop drawings and calculation prepared by the professional architect or engineer shall be sealed or stamped and signed with authentication stating-, "This work was prepared by me or under my supervision and construction will be under my observation." Observation of pre-engineered truss fabrication may be satisfied through a pre -approved testing or inspecting agency. ❑ Framing plans prepared by project architect or structural engineer of record shall identify on plans the pre-engineered roof truss document identification, designer and fabricator, sealed or stamped and signed with authentication stating, "This work was prepared by me or under my supervision and construction will be under my observation."