HomeMy WebLinkAboutStreet Light Standards (Current)-15Oct19-COMPLETEHarry Kim
Mayor
Wil Okabe
Managing Director
CaUHN of p""abial"i
DEPARTMENT OF PUBLIC WORKS
Traffic Division
108 Railroad Ave. -Hilo, Hawaii 96720
(808) 961-8341 - Fax (808) 961-8591
dpwtrfghawaiicounty. gov
Aaron Takaba
Traffic Division Chief
STREET LIGHT STANDARDS
=I?
Aaron Takaba, P.E.
Chief, Traffic Division
TRAFFIC DIVISION
October 15, 2019
10/15/19
Date
STREET LIGHT NOTES
NEW INSTALLATIONS:
1. Submit scaled plans showing street light locations and details of fixture mounting,
luminaire type, arm length, and identification tags. For underground circuits,
foundations, bases, and poles, approved construction drawings shall be submitted to
the Traffic Division prior to the start of construction.
2. To energize the street lights in a subdivision with two (2) or more street lights, the
developer shall set up an account with HELCO and provide street names, pole
numbers, GPS coordinates, wattages, and billing address. A copy of the street light
information shall be provided to the Traffic Division for inspection purposes. Until the
roads are officially dedicated to the County, the developer shall be responsible for the
pertinent energy costs. After dedication, energy billing shall be transferred to the
County.
3. For proposed street lights, submit isoline drawings, showing the illumination within the
project area. The street lighting illumination levels shall be calculated according to the
most current edition of the AASHTO Roadway Lighting Design Guide or the ANSI/IES
RP -8-14: Recommended Practice for Design and Maintenance of Roadway and
Parking Facility Lighting.
4. All street light identification tag numbers for metal poles shall start with "1" and
continue numerically along each street. Identification tags numbers shall be a
Standard Highway font and have a height of 3". All street light identification tag
numbers for wooden poles shall be in accordance with HELCO's sequential
numbering system.
5. Any proposed changes to the approved plans shall require proper justification from
the developer/consultant/contractor, and submittal of updated drawings to the Traffic
Division for final approval.
6. For construction in -progress, the developer/contractor shall direct inquiries and
coordinate inspection requests with the Traffic Division's inspectors.
7. For final street light inspections, the developer/contractor shall contact the applicable
government agency to schedule inspections with the Traffic Division.
8. Allow for a 3 -day minimum lead time on all inspection requests.
9. "As -Built" plans shall be furnished by the developer to the Traffic Division, at the
completion of all street light projects.
Page 1 of 4
Street Light Notes, cont'd
EXISTING POLE INSTALLATIONS:
1. When street lights are to be installed on existing wooden utility poles within the County
ROW, the Traffic Division shall be contacted in order to initiate the joint pole
application process with HELCO. No street lights shall be installed until the pertinent
joint pole applications have been approved.
2. Upon signed approval by the Traffic Division, street lights on existing wooden utility
poles can be installed (4 maximum) by the Traffic Division at a cost of $2,500 per
street light. The developer shall submit a check payable to the County, Director of
Finance, along with the subdivision number, DPW folder number, TMK number, utility
pole 6 digit ID numbers, and GPS coordinates.
3. When street lights are installed within the County ROW with existing street lights, the
new street light installations shall conform to the existing adjacent street light
configuration on that roadway.
STREET LIGHTING ELECTRICAL PRACTICES:
1. The Contractor shall provide all necessary secondary circuit extensions to the nearest
HELCO secondary. If street lights are installed before HELCO installs their secondary,
the contractor is responsible for coordinating and informing HELCO of street light
locations and pole contacts.
2. The contractor shall inscribe the month and year of installation on photoelectric (PE)
cells and lamps. All PEs shall have the north index facing north.
3. All overhead wired street light fixtures shall be bonded to the neutral wire in the
fixtures. All bonded street light fixtures shall have a 2"X2" reflective green sticker
placed at the base of the wire opening on the aluminum street light arms, signifying
that the street lights are bonded.
4. All underground street light wiring shall have a #6 AWG (minimum) ground wire routed
in series from the neutral ground source point to each street light ground rod for a
street light fixture ground point. A ground test measurement should indicate a
maximum of 25 ohms to ground.
5. A minimum 8'X5/8" copper ground rod shall be used for each street light foundation.
MATERIALS:
1. All labor and materials shall have a minimum one-year warranty from date of final
acceptance.
Page 2 of 4
Street Light Notes, cont'd
2. Street light fixtures: Shall be compliant with the current edition of the County of Hawaii
Outdoor Lighting Ordinance and approved by the Traffic Division.
LED Luminaries:
E2 Lighting:
E2-H150-ST-35W-7PD-SF, 35 W
E2-H150-ST-70W-7PD-SF, 70 W
E2-H150-ST-85W-7PD-SF, 85 W
3. Photoelectric cells: Completely solid state, Fail "On", Fisher Pierce: FP -7790B -SPS
4. Aluminum Poles: Shall be approved by the FHWA and comply with the current edition
of the AASHTO Street Lighting Standard Specifications for Structural Supports for
Highway Signs, Luminaires, and Traffic Signals. The poles shall have the following:
• 0.188" minimum wall thickness;
• 12" pole mount -base bolt pattern;
• Internal mounted vibration damper;
• Arm length shall be per plan (see below); and
• All exposed surfaces shall be powder coated gray finish (Any other finish shall be
approved by the Traffic Division).
Pole Types:
Hapco: Single mast arm assembly Part# RTA30D8BFM1*-GC or approved equal.
*Mast arm length is 8' or 10'.
Hapco: Single truss arm assembly Part# RTA30D8BFT1*-GC or approved equal.
*Truss arm length is 12' or 15'.
5. Anchor Bolts: Use galvanized steel anchor bolts.
6. Transformer Bases: Shall be approved by the FHWA and comply with the current
edition of the AASHTO Break -Away Specifications. The transformer bases shall
have the following:
• Aluminum;
• All exposed surfaces shall be powder coated gray finish (any other finish shall be
approved by the Traffic Division) and
• 14" foundation base bolt circle.
Types:
Hapco: 70501 (T131-17).
Valmont: M093 (T131-17)
Page 3 of 4
Street Light Notes, cont'd
7. Transformer Bases shall use leveling shims Hapco part # 51432-001 or approved
equal. Leveling nuts can be used as approved by the Traffic Division.
8. Wooden Poles:
• 35' in length;
• Southern Yellow Pine or Douglas Fir;
• Class III;
• Penta -treated per AWPA Use Category System, UC4B; and
• Commodity Specification D.
9. Wire:
• #12 -AWG RHW-stranded copper wire;
• Size shall be per plan; and
• White tape wrap denoting neutral shall be a minimum of 12" on the street light side
and 4' on the secondary tapped (HELCO) side.
REFERENCES:
1. When specific street light information is not covered is this document, refer to the
HDOT 2008 Specifications, the 2005 Standard Plans, or contact the Traffic Division
at 808-961-8341.
*NOTE: ALL WORK SHALL CONFORM TO THE LATEST EDITION OF THE
NATIONAL ELECTRICAL CODE (NEC).
Dated: 15 -Oct -19; supersedes all previous versions.
Page 4 of 4
Cast Aluminum Pole Cap
with Stonless Steel Screws
a�
4.5" Top Dia.
CN
6"
NOTES
8' or 10'
8
Tapered Aluminum Tube
0.125 Wall Alloy 6063—T6
Elliptical Section
Extruded Aluminum Pole Plate
Alloy 6063—T6 with J"-13NC
Stainless Steel Hardware
(Wire Hole in Shaft with 1" I.D. Rubber Grommet)
0.188" Wall Alloy 6063—T6
Gray Powder Coated Finish
(Mast Arm, Pole Cap, and
Transformer Base)
(4) Galvanized Steel Anchor Bolts
AASHTO M314-90 Gr. 55
10" Galvanized Threaded End
Per ASTM A152
(4) Galvanized Steel Hex Nuts
(4) Galvanized Steel Lock Washers
2°
30'
(to Ground Line)
14"0
Bolt Pattern
Galvanized Steel Connecting Hardware:
(4) 1"-8NC Hex Head Bolts
(4) 1"-8NC Hex Nuts
Varies
if
(4) 1" Lock Washers
(4) 1" Flat Washers
a a
Base Flange Alloy 356—T6
with Bolt Covers and
Anchor Bolt
Stainless Steel Hex Head Screws
a
Grounding Provision
8" Bottom Dia. TB1-17 Transformer Base �J
of Alloy 356—T6 with Aluminum Door and
17" Stainless Steel Hex Head Screw and
(8) Galvanized Steel Heavy Washers
15j" Leveling Shims WARNING:
Hapco: 51432-001 (or equal) or Do not install light pole without luminaire.
Leveling Nuts
STREET LIGHT POLE WITH MAST DETAIL
N.T.S.
1. Pole shaft shall be costructed of extruded tube of 6063 aluminum allow per ASTM 8221 and shall be full—length
heat—treated after welding on the base flange to T-6 temper.
2. Pole shaft shall be free of longitudinal welds.
3. Pole shaft cap, when required, shall be 443 or 356 cast aluminum alloy and attached using stainless steel hardware.
4. Equivalency reference: Hapco RTA30D8BFM1*—GC.
*Mast arm length is 8' or 10'.
STREET LIGHT DETAIL STANDARD
COUNTY OF HAWAII Aluminum Pole with Mast DETAILS SL -01
N.T.S. 10/15/19
12' or 15'
2°
Cast Aluminum Pole Cap �8
with Stanless Steel Screws
a�
Extruded Aluminum Tube
4.5" Top Dia. 0.145 Wall Thickness
Alloy 6063—T6
Tapered Aluminum Tube 30'
Elliptical Sections 0.125 Wall Thickness
Alloy 6063—T6 (to Ground Line)
Pole Plate Alloy 6063—T6
with (4) 4"-13NC Stainless Steel
Hex Head Bolts, Hex Nuts, and Lock Washers
(Wire Hole in Shaft with 1" I.D. Rubber Grommet)
Pole Plate Alloy 6063—T6
with (2) J"-16NC Stainless Steel
0.188" Wall Alloy 6063—T6 Hex Head Bolts, Hex Nuts, and Lock Washers
Gray Powder Coated Finish into Aluminum Rivnuts Installed in the Shaft
(Truss Arm, Pole Cap, and
Transformer Base)
14"0
Bolt Pattern
(4) Galvanized Steel Anchor Bolts
AASHTO M314-90 Gr. 55 _
10" Galvanized Threaded End
Per ASTM A152
(4) Galvanized Steel Hex Nuts
(4) Galvanized Steel Lock Washers
Galvanized Steel Connecting Hardware:
(4) 1"-8NC Hex Head Bolts Varies
(4) 1"-8NC Hex Nuts
(4) 1" Lock Washers
(4) 1" Flat Washers a
VGrounding
Flange Alloy 356—T6 a 36"
olt Covers and Anchor Bolt
ss Steel Hex Head Screws
Provision
8" Bottom Dia.ansformer Base
56—T6 with Aluminum Door and
17" Steel Hex Head Screw and
(8) Galvanized Steel Heavy Washers
15j" Leveling Shims WARNING:
Hapco: 51432-001 (or equal) or Do not install light pole without luminaire.
Leveling Nuts
STREET LIGHT POLE WITH TRUSS DETAIL
N.T.S.
NOTES
1. Pole shaft shall be costructed of extruded tube of 6063 aluminum allow per ASTM 8221 and shall be full—length
heat—treated after welding on the base flange to T-6 temper.
2. Pole shaft shall be free of longitudinal welds.
3. Pole shaft cap, when required, shall be 443 or 356 cast aluminum alloy and attached using stainless steel hardware.
4. Equivalency reference: Hapco RTA30D8BFT1*—GC
*Truss arm length is 12' or 15'.
STREET LIGHT DETAIL STANDARD
COUNTY OF HAWAII Aluminum Pole with Truss DETAILS SL -02
N.T.S. 10/15/19
STREET LIGHT I.D. TAG DETAIL
N.T.S.
NOTES
1. Font Style: Standard Highway.
2. Font Size: 3" (height).
3. Machine cut on black adhesive Scotchlite (or equal) sheeting.
4. Affix number to clean surface of pole 6'-0" above finish grade.
5. Street light number to face street.
I STREET LIGHT DETAIL
COUNTY OF HAWAII Pole Identification
N.T.S.
10/15/19
STANDARD I SL -03
DETAILS
Prima
Secondary
conductor)
Required clear
per GO 6 rule F
Vertical plane
CL
Figure 5-11. Street lighting from an overhead electrical source.
WOOEDN POLE DETAIL
N.T.S.
NOTES
1. For more information, contact the Traffic Division at 808-961-8341.
2. REFERENCE: HELCO Electric Service Installation Manual, Eighth Edition.
I STREET LIGHT DETAIL
COUNTY OF HAWAII Wooden Pole
N.T.S.
tical clearance less
n 2'-0" allowed outside
2' clearspace
Centerline of luminaire
2'-6" or T-3" nominal
Centerline of bracket
nal to Grade Level
10/15/19
STANDARD I SL -04
DETAILS
x418" P .0 18" m
A
Customer's luminaire on wood
pole supporting power company's
secondary aerial cable.
r�
C
B
Customer's luminaire
on pole requiring a service drop.
A. No. 8 AWG 7 -strand aluminum wire, RHW, of sufficient length to splice to the power company's lines. Coil
the wire at the pole, pending splicing by utility.
B. In the line unfused, insulated separable connector, suitable for No. 8 AWG stranded aluminum wire on line
side, No. 12 copper wire on load side.
C. In the line fuse holderand fuse suitable for No. 8 AWG stranded alurninurn wire on line side and No. 12
AWG copper on load side.
D. No. 12 AWG RHW black, single conductor stranded wire.
E. No. 12 AWG RHW white, single conductor stranded wire
F 3/4" PVC Schedule 80 conduit.
G. Luminaries and bracket.
H. Aluminum service drop anchor bolt, assembly furnished and installed by customer.
I. Wood pole by customer.
J. Preformed grip by customer.
K. Aluminum service drop by customer.
L. 12" minimum clearance between the light fixture and the utility service conductor. If not possible when
service drop passes over luminaries, the utility will select a splicing point which will provide a passage to
the right or left of luminaries to provide a 12" clearance.
Figure 5-12. Street lighting from an overhead electrical source, details.
WOODEN POLE DETAIL
NOTES N.T.S.
1. For more information, contact the Traffic Division at 808-961-8341.
2. REFERENCE: HELCO Electric Service Installation Manual, Eighth Edition.
3. Modifications to fuse holder were approved by HELCO (as shown above).
I STREET LIGHT DETAIL
COUNTY OF HAWAII Wooden Pole
N.T.S.
10/15/19
STANDARD ISL -O5
DETAILS
2" Sch. 40 PVC for
Additional Ground Connection
Proi
Transformer Base
Leveling Shims
HAPCO: 51432-001 (or equal)
or Leveling Nuts
Finish Grade
18"
2" Sch. 40 PVC
All 90s to be 18"
Sweep Radius
.011
2'-6" sq.
TOP
J" Drain Hole
Ground Rod
Grout
- (4) — 24"xi" Flat Washers
(2) — 1j"xj" Lock Washers
Provide (2) Leveling Nuts and
(2) 2j"0xj" Thick Galvanized Flat
Washers for each Anchor Bolt
51" Sidewalk (where applicable)
Form Top 6" Only
and Chamfer 1"
(5) — #6 Vertical Rebars Each Side
w/#4 Closed Stirrups at 12" O.C.
3,000 psi Concrete
Fill to Limits of Excavation in
Undisturbed Ground Conditions
J"Ox8' Long Copper Ground Rod
or Alternate as Approved by Others
o
All footing designs that deviate
from this standard shall be
designed, approved, and stamped
o by a licensed Structural Engineer
_I I and verified by the Traffic Division.
NOTES SIDE
1. If foundations are precast, manufacturer and materials suppliers shall be in compliance with the most current edition
of the Hawaii Standard Specifications for Road, Bridge and Public Works Construction and where applicable the National
Precast Concrete Association.
2. 3,000 psi 28—day compression strength concrete shall be used.
3. Each foundation shall not be handled or transported until at least 80% of the 28—day concrete compression strength
has been reached.
4. Each foundation shall not be installed until the 28—day concrete compression strength has been achieved.
5. CLSM or equivalent shall be used to backfill around each foundation (cast—in—place or precast).
6. For inspections, contact the Traffic Division at 808-961-8341, and plan for 3—day minimum lead time.
STREET LIGHT DETAIL STANDARD
COUNTY OF HAWAII Street Light Foundation DETAILS SL -06
N.T.S. 10/15/19
„ � o
Al 0o a J
W y 0 QZ�ui
' Z
ZO�v
0 w
W Z
Lu a.
v eg3 W u, LL
” ���3
cn Z
Iz
A2Q'N- � LL U
w xa oma¢ �8 Q
26 s�
J
cn
10
12
Q
U_
\ Z
\ O
pM \ Q d w
a' cn
Z
C 'a
� / m
3
(WJ p
14i -
K
r N Z
J
m° U i•l o.�. �Ii:
ro�a; v x a
m 8 m
m T�rB n vpN �
v � I
o
W
� N
X ^ X L
-
W O V O a ->
x a E3 E a o vo
m a - N �-
Ui VI .N- N c
p y O COX_
N -
E
v v o 0
--
a
E> m
N
2 O a~ 0 0- O E
U1 aai�cvi
w
N a Wd
F-
0
Z F v 'o roof
T
a k O
Z Y
O (n
s
5 3
=t t
a u
n
_
Oo
d O
s
>
o�
§ 152 o 0 3 wa�F
aof E
R
Z O ig 2
o
m
-
m _ d o rn
c �. c3 m m d o
= V p
s
o p a.
T N
CD
F -
z
mZ
�Z
Z o N 3 w c o
„y o -o `
H
W U
z
D
www
O x a`M c y N mmL'' N
W Y.
U
U
O
LL
wa
m caLLIva am3i w '�
N
V
O N L
p
3�
M
z@ M N N_0.L
LU 3xo-o= 3ai m
a°'i
wm
a'ot X 4,
_W max f6 °?a ca cLi
�$
U N
� d O O N d d lC N
'� C m N
Q N C O N O N C N m C i0
Um p N
�= Q
O
W O= N L . Q a L 2 L L "' p
Oma- Na'SF—CL a2
~
Z LV of 4 tci N ac0 U I,: W c6 N Oi
ZI
y
tlOrl �
N >
Q
w a
C
a
a
0
�
A
m
p
T
mU
�=
Ua
W m
dW
OU
f=
Z
p O
Q
�2 (O
W
C
C
o
-o
OID tT U
C
L C X y N
p N
a v a O
Y x c U
oM -o
z
Q D y W
W
o
5
_
w a
o -
�'
r
z
W
cIJ
2 x
LU
ai
Z
Z�
Z
o
LU .III
—
w �
z
�
CD
CD
af
w
CD
I(
z
3Q
Z
Amo
¢w �5
U N
J
� o
d
3
a� 2`3Zw
s
w
c
=�
W
f
J c 3 a0
- -
-
- - - - -
w ao o Tll,lll_
�.
N or
S
W
a w R U
OM
_
c
a
_-_a
N
H 0
rn K
wa
Nd ILLYiit ♦tOZ/K/L
Q3Wlk '?WI4lNfIlOL SM/Id UN�VNMJS LCfI m cM,�MJmra WWMHAS� N;M O\SGVON S NOMO\T701
LNDIl'o
:NplgOM M
HELCO
Power Source
F1 AND F2
Located Here
Luminaire: LED
Full Cutoff Electronic Fixture
with <2% Blue Light Content
Photocell
Contacts Rated for
120/240 VAC Operation
2#12 RHW—USE
60OV, 1#12 GND (TYP)
Transformer Base
(Breakaway)
2"C, 2#4
RHW—USE, 600V
1#6 GND (TYP)
OA
OB
NEUTRAL
GROUND
Max #2
RHW
17"X30" Polymer Precast
Concrete Pullbox
Refer to Traffic Division
Street Light Pullbox Details
NOTES
SL -1
fl
SL -2
2-2"C, PVC
PB2 i
SL—X
2-2"C, PVC
PBX
Waterproof
Cable _ _[J—
Connector
Kit
6A Fuse
Neutral Bonded
to Ground
Ground Rod
WIRING AND CONDUIT DETAIL (UNMETERED)
N.T.S.
Transformer Base
(Breakaway)
Neutral Bonded
to Ground
OA
OB
NEUTRAL
GROUND
Ground Rod
1. Maintain street light underground conduit system separate from other conduit installations.
2. Street light pullbox apron required per HELCO specifications.
3. Disconnect fuses F1 and F2, type and amperage to be determined by street light circuit loading.
4. For more information, contact the Traffic Division at 808-961-8341.
STREET LIGHT DETAIL STANDARD
COUNTY OF HAWAII Wiring and Conduit Installations DETAILS SL -09
N.T.S. 10/15/19
HELCO
Power Source
F1 AND F2
Located Here
Luminaire: LED
Full Cutoff Electronic Fixture
with <2% Blue Light Content
Photocell
Contacts Rated for
120/240 VAC Operation
2#12 RHW—USE
60OV, 1#12 GND (TYP)
Transformer Base
(Breakaway)
2"C, 2#4
RHW—USE, 600V
1#6 GND (TYP)
OA
OB
NEUTRAL
GROUND
Max #2
RHW
17"X30" Polymer Precast
Concrete Pullbox
Refer to Traffic Division
Street Light Pullbox Details
NOTES
SL -1
fl
SL -2
2-2"C, PVC
PB2 i
Waterproof
Cable
Connector Kit
6A Fuse
Ground Rod
SL—X
2-2"C, PVC
PBX
WIRING AND CONDUIT DETAIL (METERED)
N.T.S.
Transformer Base
(Breakaway)
OA
OB
NEUTRAL
GROUND
Ground Rod
1. Maintain street light underground conduit system separate from other conduit installations.
2. Street light pullbox apron required per HELCO specifications.
3. Disconnect fuses F1 and F2, type and amperage to be determined by street light circuit loading.
4. For more information, contact the Traffic Division at 808-961-8341.
STREET LIGHT DETAIL STANDARD
COUNTY OF HAWAII Wiring and Conduit Installations DETAILS SL -10
N.T.S. 10/15/19
REFERENCES
1. County of Hawaii Outdoor Lighting Ordinance
2. LED Street Light Specifications
-35 W
-70 W
-85 W
3. HELCO Electric Service Installation Manual, Eighth Edition, Page 93
4. HELCO Electric Service Installation Manual, Eighth Edition, Page 94
5. Pullbox Detail: PG1730BA18
6. Pullbox Cover Detail: PG1730HHOOP
7. Pullbox Detail: PC1212BA12
8. Pullbox Cover Detail: PG1212HA00
§ 14-50 HAWAII COUNTY CODE
Article 9. Outdoor Lighting.
Section 14-50. Applicability and scope of article.
(a) This article shall apply to the installation of all outdoor lighting fixtures within the
County.
(b) The provisions of this article, including provisions for the imposition upon any
person of the penalties by fine for any violation of this article, shall not be
construed to exclude the operation of applicable State statutes or other County
ordinances. In the case of conflict with other County ordinances, the stricter
ordinance shall apply.
(1988, ord 88-122, sec 3.)
Section 14-51. Definitions.
(a) As used in this article, unless the context clearly indicates otherwise:
(1) "Outdoor lighting fixture" means any outdoor artificial lighting device, fixture,
lamp, or other similar device, permanently installed or portable, which is
intended to provide illumination for either visibility or decorative effects. Such
device shall include, but not be limited to, search, spot, and flood lighting used
for:
(A) Buildings and structures;
(B) Recreational facilities;
(C) Parking lots;
(D) Landscape lighting;
(E) Business and advertising signs;
(P) Roadways;
(G) Walkways.
(2) "Class I lighting" means all outdoor lighting used for, but not limited to,
outdoor sales and eating areas, assembly or repair areas, advertising or
business signs, recreational facilities, and other similar applications in which
color rendition is important.
(3) "Class II lighting" means all outdoor lighting used for, but not limited to,
illumination for walkways, roadways, equipment yards, parking lots, outdoor
security, and other similar applications in which general illumination of the
grounds is the primary concern.
(4) "Class III lighting" means any outdoor lighting used for decorative effects. It
includes, but is not limited to, waterfall and pond lighting and architectural
highlighting for buildings and landscapes.
(5) "Building official" means the director of public works or the director's
designated representative.
(6) "Individual" means any private individual, governmental entity, tenant,
lessee, owner, or any commercial entity including, but not limited to,
companies, partnerships, joint ventures, or corporations.
SUPP.1 (1-2017) 14-22
GENERAL WELFARE
§ 14-51
(7) "Fully shielded" means that the outdoor lighting fixture is constructed so that
all of the light emitted by the fixture is projected below the horizontal plane of
the lowest point of the fixture.
(8) "Partially shielded" means that the outdoor lighting fixture is constructed so
that at least ninety percent of the light emitted by the fixture is projected
below the horizontal plane of the lowest point of the fixture.
(9) "Blue light content" means the ratio of the amount of energy emitted by the
outdoor light fixture between 400 and 500 nm divided by the amount of energy
between 400 and 700 nm.
(10) "Traffic color compliant" means the 1931 CIE x y color coordinates of the
outdoor light fixture is outside of any of the traffic signal color boxes as defined
by ITE ST -052 500/AGS-PM/1105.
(1988, ord 88-122, sec 3; am 2001, ord 01-108, sec 1; am 2011, ord 11-18, sec 1.)
Section 14-52. General requirements.
(a) Standard fixture. All class types of outdoor light fixtures shall follow the
requirements set forth in Table 14-A.
(b) Shielding. All outdoor lights shall be shielded pursuant to the requirements set
forth in Table 14-A.
(c) Hours of operation. All outdoor light fixtures shall be subject to the hours of
operation as required by Table 14-A.
(d) Mercury vapor lights prohibited. Mercury vapor lamps shall not be used for any
new outdoor lighting installations or for the replacement of any existing
installation. All existing mercury vapor outdoor lighting fixtures shall be removed
by August 17, 1998.
(e) Blue light content. The blue light content of the outdoor light fixture shall be
pursuant to the requirements set forth in Table 14-A.
(f) Traffic color compliant. The color of the outdoor light fixture shall be pursuant to
the requirements set forth in Table 14-A.
(1988, ord 88-122, sec 3; am 2011, ord 11-18, sec 2.)
Section 14-53. Exemptions.
(a) Existing light fixtures. All outdoor light fixtures planned and approved by the
County or existing and legally installed prior to September 1, 1988, are exempt
from the installation and shielding requirements of this article, except that when
existing outdoor light fixtures become inoperable, the outdoor light fixtures which
replace them shall comply with the requirements of this article.
(b) Fossil fuel light. All outdoor light fixtures producing light directly by the
combustion of fossil fuels, such as kerosene and gasoline, shall be exempt from the
requirements of this article.
(c) Holiday decorative lighting. Low wattage fixtures used for holiday decorations shall
be exempt from the requirements of this article.
14-23 SUPP.1 (1-2017)
§ 14-53
HAWAII COUNTY CODE
(d) Residential incandescent illumination. Private residential incandescent light
fixtures which are fully shielded or have a lumen output of less than eight thousand
one hundred lumens for each acre of property that is intended to be illuminated
shall be exempt from the requirements of this article.
(e) Business signs. Outdoor advertising signs, if constructed of translucent material,
and illuminated totally from within and colored with an opaque background using
translucent letters or symbols, shall be exempt from the requirements of this
article, except that the hours of operation shall be the same as those for Class I
outdoor lighting.
(f) Searchlights. Searchlights used for advertising purposes shall be exempt from the
requirements of this article, except that the operation of such lights is limited to the
hours of 6:00 p.m. to 10:00 p.m.
(g) Emergency lighting. Emergency lighting required for public safety is exempt from
the requirements of this article.
(1988, ord 88-122, sec 3.)
Section 14-54. Submission of plans.
(a) All outdoor lighting fixtures shall be installed in conformance with the provisions of
this article and those of the electrical code of the County as applicable and subject
to the appropriate permit and inspection requirements thereof. The applicant for
any permit required by the County for work involving nonexempt outdoor light
fixtures shall submit to the building official proof that the proposed work will
comply with the article requirements. The submission shall contain, but not be
limited to, the following:
(1) The location of the site where the outdoor light fixtures will be installed;
(2) Plans indicating the type(s) of outdoor light fixtures to be used and their
location on the premises;
(3) A description of the outdoor light fixtures including, but not limited to,
manufacturer's catalog cuts and drawings.
(b) The plans and descriptions required by subsection (a) sufficiently complete to
enable the building official to readily determine whether compliance with the
requirements of this article will be secured. If such plans and descriptions cannot
enable this ready determination, by reason of the nature or configuration of the
devices or fixtures proposed, the applicant shall be required to submit further proof
of compliance. Furthermore, any design, material, or method of installation not
specifically forbidden by this article may be used, provided any such alternate has
first been approved by the building official. The building official may approve any
such proposed alternate provided:
(1) It is at least approximately equivalent to the applicable specific requirements
of this article; and
(2) It is otherwise satisfactory and complies with the intent of this article.
(1988, ord 88-122, sec 3.)
SUPP.1 (1-2017) 14-24
GENERAL WELFARE
Section 14-55. Tables.
§ 14-55
Table 14-A
Lamp Type Shielding Requirement Operation Restrictions
Class I
Low pressure sodium
Fully shielded
None
Low pressure sodium
Partially shielded
Existing fixtures only. New
installations as of October
2010 rohibited
Others above 4,050 lumens
Fully shielded
Off from 11:00 p.m. to
sunrise
Others above 4,050 lumens
Fully shielded
Off from 11:00 p.m. to
sunrise
LED fixtures with less than
2% blue light content
Fully shielded
Off at 11:00 p.m. to
sunrise*
Class II
Low pressure sodium
90 watts or less
None
Existing fixtures only.
New installations as of
October 2010 prohibited
greater than 90 watts
Partially shielded
Existing fixtures only.
New installations as of
October 2010 prohibited
Low pressure sodium
Fully shielded
None
LED fixtures with less than
2% blue light content and
traffic color compliant
Fully shielded
None
Others above 4,050 lumens
Prohibited
Others below 4,050 lumens
Prohibited
Class III
Low pressure sodium
Fully shielded
None
Others above 4,050 lumens
Prohibited
Others below 4,050 lumens
Fully shielded
Off from 11:00 p.m. to
sunrise
Neon
None
Off from 11:00 pm to
sunrise*
*These lights may remain on after 11:00 p.m. if bona fide business or recreational
activities are taking place.
(1988, ord 88-122, sec 3; am 2011, ord 11-18, sec 3; am 2013, ord 13-60, sec 2.)
14-25 SUPP.1 (1-2017)
14-55.1 HAWAII COUNTY CODE
Section 14-55.1. Penalty.
Any person violating any provision of this article shall, upon conviction, be
punished by a fine not to exceed $500. Such person shall be deemed guilty of a separate
offense for each and every day any violation of this article is committed. Furthermore,
payment of such a fine shall not relieve the individual from the responsibility of
correcting the violative condition, nor shall it preclude the County from instituting any
action for its removal.
(1988, ord 88-122, sec 3.)
SUPP.1 (1-2017) 14-26
35W STREET LIGHT
E2-H150-ST-35W-7PD-SF
Project Name:
Fixture Schedule:
"loHS
Specifications
E2 Lighting's line of Street Lighting feature
Primary use: City expressway, trunk road,
-11PLIAM
Light Output
l'
Efficacy
Wattage
C O V$
Color Accuracy (CRI)
Kelvin (CCT)
Power Factor
Color: Silver Weight: 14.33lbs. Working Environment
Input Voltage
Product Description
Applications
E2 Lighting's line of Street Lighting feature
Primary use: City expressway, trunk road,
ready -to -use LED light source solutions for
factories, schools, garden, parking lots, public
field -installed fixtures in a variety of
parks, etc.
applications. This 35 -watt model utilizes
Advertising Lighting, Architectural Lighting,
LM -80 -rated LEDs to ensure long life and high
Bridge, Car Park, Garden, Highway, Highway
thermal endurance. The fixture features a high-
Lighting, Mining, Park, Petrol Station, Pooling
impact lens over a series of LED modules,
Lighting, Sport Lighting, Sport Yard, Square,
sealed in a durable die cast aluminum alloy
Square Lighting, Tunnel Lighting
A360 ploymetric housing. Applications include
illuminating streets, roadways, pedestrian
walkways, bikeways and parking lots in parks,
corporate and school campuses and
municipalities. In addition to diminishing energy
costs, the fixtures virtually eliminate
maintenance expenses with an L70 lifetime of
80,000+ hours at 64 Celsius. UL listed and
RoHs compliant.
Available Options
• AC100-277V, 180-480V models available
• Beam Angle (Type II): 85x135 DEG, Beam
Angle (Type III): 90x140 DEG
Dimmable and non -dimmable
Photocell sensor: 5 or 7 pin twist lock
Lighting
Catalogue Number:
Comments:
Warranty
E2 warrants that our LED products will be free
from defects in materials and workmanship for
a period of Seven (7) years from the date of
delivery to the end user, including coverage of
light output, color stability, driver performance
and fixture finish. Please see our full warranty
terms located at www.e2lightingusa.com.
Technical Support
Need help? Please contact our technical support
team for assistance at (213) 270-1938 .
Cautions
Installation by a licensed electrician only.
Product failure caused by misuse,
modification or power surges are not covered
under warranty.
Proauct Features • Actual product performance may differ as a
•Type II and III distributions available result of end-user environment and
• projected to be 80,000+ hours at 64 degrees C application.
L70 lifespan ro
p p 1 9 Input voltage may vary depending on
• Universal 120-277V, 180-480V models available photocell configuration.
• 10kV surge protection standard
• Power factor >0.9
• BUG rating : U=0
• IP66 rating
• Seven year warranty
• Mean Well Driver
• UL wet location listed
• Mounting with Mast arm fitter for 2-3/8" OD, 3/8" stainless steel hex head bolts
• Housing : EPA(sq. ft.) < 1.0 sq. ft.
• Housing : Die cast aluminum alloy A360 ploymetric
• Housing : Finish, Polyester Triglycidyl Isocyanurate (TGIC) super durable polyester powder coat or equivalent.
• Coast finish by ASTM G85 gray color
• 3 port UL listed Terminal block
Distributed by: LED Hawaii
2046 Lauwiliwili St. #1201. Kapolei, HI 96707/ E: sales@ledhawaii.com / Phone: (808) 306-7873
Frequency
50-60 Hz <
4,725 + LM
THD
<15%
135+ LPW
L70 Lifespan
80,000+ hr @
35 W
64 Celsius
>> 52
IP Rating
IP66
2600K
Beam Angle
Type II or III
> 0.90
Dimming Compatible
Yes
-22• F-149• F
Blue Light Content
0.48%
See below
Lens
Tempered Glass
Warranty
E2 warrants that our LED products will be free
from defects in materials and workmanship for
a period of Seven (7) years from the date of
delivery to the end user, including coverage of
light output, color stability, driver performance
and fixture finish. Please see our full warranty
terms located at www.e2lightingusa.com.
Technical Support
Need help? Please contact our technical support
team for assistance at (213) 270-1938 .
Cautions
Installation by a licensed electrician only.
Product failure caused by misuse,
modification or power surges are not covered
under warranty.
Proauct Features • Actual product performance may differ as a
•Type II and III distributions available result of end-user environment and
• projected to be 80,000+ hours at 64 degrees C application.
L70 lifespan ro
p p 1 9 Input voltage may vary depending on
• Universal 120-277V, 180-480V models available photocell configuration.
• 10kV surge protection standard
• Power factor >0.9
• BUG rating : U=0
• IP66 rating
• Seven year warranty
• Mean Well Driver
• UL wet location listed
• Mounting with Mast arm fitter for 2-3/8" OD, 3/8" stainless steel hex head bolts
• Housing : EPA(sq. ft.) < 1.0 sq. ft.
• Housing : Die cast aluminum alloy A360 ploymetric
• Housing : Finish, Polyester Triglycidyl Isocyanurate (TGIC) super durable polyester powder coat or equivalent.
• Coast finish by ASTM G85 gray color
• 3 port UL listed Terminal block
Distributed by: LED Hawaii
2046 Lauwiliwili St. #1201. Kapolei, HI 96707/ E: sales@ledhawaii.com / Phone: (808) 306-7873
70W STREET LIGHT
E2-H150-ST-70W-7PD-SF
Project Name:
Fixture Schedule:
""'oHS
Specifications
E2 Lighting's line of Street Lighting feature
Primary use: City expressway, trunk road,
MP`IAM
Light Output
nPL
Efficacy
Wattage
CV$
Color Accuracy (CRI)
Kelvin (CCT)
Power Factor
Color: Silver Weight: 14.33lbs. Working Environment
Input Voltage
Product Description
Applications
E2 Lighting's line of Street Lighting feature
Primary use: City expressway, trunk road,
ready -to -use LED light source solutions for
factories, schools, garden, parking lots, public
field -installed fixtures in a variety of
parks, etc.
applications. This 70 -watt model utilizes
Advertising Lighting, Architectural Lighting,
LM -80 -rated LEDs to ensure long life and high
Bridge, Car Park, Garden, Highway, Highway
thermal endurance. The fixture features a high-
Lighting, Mining, Park, Petrol Station, Pooling
impact lens over a series of LED modules,
Lighting, Sport Lighting, Sport Yard, Square,
sealed in a durable die cast aluminum alloy
Square Lighting, Tunnel Lighting
A360 ploymetric housing. Applications include
illuminating streets, roadways, pedestrian
walkways, bikeways and parking lots in parks,
corporate and school campuses and
municipalities. In addition to diminishing energy
costs, the fixtures virtually eliminate
maintenance expenses with an L70 lifetime of
80,000+ hours at 64 degrees Celsius. UL listed
and RoHs compliant.
Available Options
• AC100-277V, 180-480V models available
• Beam Angle (Type II): 85x135 DEG, Beam
Angle (Type III): 90x140 DEG
Dimmable and non -dimmable
Photocell sensor: 5/7 pin twist lock
Lighting
Catalogue Number:
Comments:
Frequency 50-60 Hz <
9,450+ LM
THD <15%
135+ LPW
L70 Lifespan 80,000+ hrs @
70 W 64Celsius
> 52 IP Rating IP66
2600K Beam Angle Type II or III
> 0.90 Dimming Compatible Yes
22° F-149• F Blue Light Content 0.48%
See below Lens Tempered Glass
Warranty
E2 warrants that our LED products will be free
from defects in materials and workmanship for
a period of Seven (7) years from the date of
delivery to the end user, including coverage of
light output, color stability, driver performance
and fixture finish. Please see our full warranty
terms located at www.e2lightingusa.com.
Technical Support
Need help? Please contact our technical support
team for assistance at (213) 270-1938 .
Cautions
Installation by a licensed electrician only.
Product failure caused by misuse,
modification or power surges are not covered
under warranty.
Proauct Features • Actual product performance may differ as a
•Type II and III distributions available result of end-user environment and
• projected to be 80,000+ hours at 64 degrees C application.
L70 lifespan ro
p p 1 9 Input voltage may vary depending on
• Universal 120-277V, 180-480V models available photocell configuration.
• 10kV surge protection standard
• Power factor >0.9
• BUG rating : U=0
• IP66 rating
• Seven year warranty
• Mean Well Driver
• UL wet location listed
• Mounting with Mast arm fitter for 2-3/8" OD, stainless steel hex head bolts
• Housing : EPA(sq. ft.) < 1.0 sq. ft.
• Housing : Die cast aluminum alloy A360 ploymetric
• Housing : Finish, Polyester Triglycidyl Isocyanurate (TGIC) super durable polyester powder coat or equivalent.
• Coast finish by ASTM G85 gray color
• 3 port UL listed Terminal block
Distributed by: LED Hawaii
2046 Lauwiliwili St. #1201. Kapolei, HI 96707/ E: sales@ledhawaii.com / Phone: (808) 306-7873
85W STREET LIGHT
E2-H150-ST-85W-7PD-SF
Project Name:
Fixture Schedule:
""'oHS
Specifications
E2 Lighting's line of Street Lighting feature
Primary use: City expressway, trunk road,
MP`IAM
Light Output
l'
Efficacy
Wattage
C O V$
Color Accuracy (CRI)
Kelvin (CCT)
Power Factor
Color: Silver Weight: 14.33lbs. Working Environment
Input Voltage
Product Description
Applications
E2 Lighting's line of Street Lighting feature
Primary use: City expressway, trunk road,
ready -to -use LED light source solutions for
factories, schools, garden, parking lots, public
field -installed fixtures in a variety of
parks, etc.
applications. This 85 -watt model utilizes
Advertising Lighting, Architectural Lighting,
LM -80 -rated LEDs to ensure long life and high
Bridge, Car Park, Garden, Highway, Highway
thermal endurance. The fixture features a high-
Lighting, Mining, Park, Petrol Station, Pooling
impact lens over a series of LED modules,
Lighting, Sport Lighting, Sport Yard, Square,
sealed in a durable die cast aluminum alloy
Square Lighting, Tunnel Lighting
A360 ploymetric housing. Applications include
illuminating streets, roadways, pedestrian
walkways, bikeways and parking lots in parks,
corporate and school campuses and
municipalities. In addition to diminishing energy
costs, the fixtures virtually eliminate
maintenance expenses with an L70 lifetime of
80,000+ hours at 64 Celsius. UL listed and
RoHs compliant.
Available Options
• AC100-277V, 180-480V models available
• Beam Angle (Type II): 85x135 DEG, Beam
Angle (Type III): 90x140 DEG
Dimmable and non -dimmable
Photocell sensor: 5 ar 7 pin twist lock
11,475+ LM
135+ LPW
85 W
> 52
2600K
> 0.90
-22° F-149° F
See below
Warranty
Lighting
Catalogue Number:
Comments:
Frequency
50-60 Hz <
THD
<15%
L70 Lifespan
80,000+ hrs @
64 Celsius
IP Rating
IP66
Beam Angle
Type II or III
Dimming Compatible
Yes
Blue Light Content
0.48%
Lens
Tempered Glass
E2 warrants that our LED products will be free
from defects in materials and workmanship for
a period of Seven (7) years from the date of
delivery to the end user, including coverage of
light output, color stability, driver performance
and fixture finish. Please see our full warranty
terms located at www.e2lightingusa.com.
Technical Support
Need help? Please contact our technical support
team for assistance at (213) 270-1938 .
Cautions
Installation by a licensed electrician only.
Product failure caused by misuse,
modification or power surges are not covered
under warranty.
Proauct Features • Actual product performance may differ as a
•Type II and III distributions available result of end-user environment and
• projected to be 80,000+ hours at 64 degrees C application.
L70 lifespan ro
p p 1 9 Input voltage may vary depending on
• Universal 120-277V, 180-480V models available photocell configuration.
• 1 OkV surge protection standard
• Power factor >0.9
• BUG rating : UO
• IP66 rating
• Seven year warranty
• Mean Well Driver
• UL wet location listed
• Mounting with Mast arm fitter for 2-3/8" OD, 3/8" stainless steel hex head bolts
• Housing : EPA(sq. ft.) < 1.0 sq. ft.
• Housing : Die cast aluminum alloy A360 ploymetric
• Housing : Finish, Polyester Triglycidyl Isocyanurate (TGIC) super durable polyester powder coat or equivalent.
Coast finish by ASTM G85 gray color
• 3 port UL listed Terminal block
Distributed by: LED Hawaii
2046 Lauwiliwili St. #1201. Kapolei, HI 96707/ E: sales@ledhawaii.com / Phone: (808) 306-7873
OTHER REQUIREMENTS
5.5 Street Lighting
A. Street Lighting From an Overhead Electrical Source
The customer installs and maintains conductors, conduits, separable connectors, fuse
holders, and fuses between the luminaries and the utility's overhead secondary lines or
service drop.
All parts of street light service drop, street lamps, and their supporting fixtures (including
rods, braces and guys) must not be less than 1 foot above, or 2 feet below the level of
messenger or conductors supported by messengers.
For street lighting systems in new subdivisions and roadway extensions, the customer must
submit a set of drawings of his street lighting plans to the utility.
Height requirements for pole -mounted street light meter sockets are: 5' minimum, 6'
maximum, with preferred mounting height of 5'-6" similar to outdoor meters accessible to
pedestrian traffic, as shown in the Metering chapter of this manual.
Prima
Secondary
conductor)
Required clear
per GO 6 rule E
Vertical plane
CL
Figure 5-11. Street lighting from an overhead electrical source.
tical clearance less
174" allowed outside
2' clear space
Centerline of luminaire
Z-6" or T -Y nominal
Centerline of bracket
93
Hawaiian Electric, Inc. • Hawai'i Electric Light, Inc. • Maui Electric, Ltd.
ELECTRIC SERVICE INSTALLATION MANUAL - EIGHTH EDITION
Seco
lines
to
In
C.
18" ►ice 18"
A
Customer's luminaire on wood
pole supporting power company's
secondary aerial cable.
CL
B
Customer's luminaire
on pole requiring a service drop.
No. 8 AWG 7 -strand aluminum wire, RHW, of sufficient length to splice to the power company's lines. Coil
the wire at the pole, pending splicing by utility.
In the line unfused, insulated separable connector, suitable for No. 8 AWG stranded aluminum wire on line
side, No. 12 copper wire on load side.
In the line fuse holder and fuse suitable for No. 8 AWG stranded aluminum wire on line side and No. 12
AWG copper on load side.
No. 12 AWG RHW black, single conductor stranded wire.
No. 12 AWG RHW white, single conductor stranded wire
3/4" PVC Schedule 80 conduit.
Luminaries and bracket.
Aluminum service drop anchor bolt, assembly furnished and installed by customer.
Wood pole by customer.
Preformed grip by customer.
Aluminum service drop by customer.
12" minimum clearance between the light fixture and the utility service conductor. If not possible when
service drop passes over luminaries, the utility will select a splicing point which will provide a passage to
the right or left of luminaries to provide a 12" clearance.
Figure 5-12. Street lighting from an overhead electrical source, details.
94
Hawaiian Electric, Inc. • Hawai'i Electric Light, Inc. • Maui Electric, Ltd.
SPECIFICATIONS ITEM NO. 61
Precast Polymer Concrete Pull Box, 17"x 34"x 18"
Specifications
Description: Heavy Duty w/ Open Bottom
Composition: Polymer Concrete
Load Rating: Design, 22,500lbs /Test Loading, 33,7SO lbs
Compliance: UL listed,
ANSI/SCTE 77, ANSI Tier 22
Dimensions:
EQUIVALENCY REFERENCE:
Quazite Precast Polymer Concrete Box, Part # PG1730BA18
SPECIFICATIONS ITEM NO. 62
Precast Polymer Concrete Pull Box Cover, 17"x 30"
Specifications
Description: Heavy Duty w/2 Bolts
Composition: Polymer Concrete
Logo: STREET LIGHT
Load Rating: Design, 22,500 lbs /Test Loading, 33,750 lbs
Compliance: UL listed,
ANSI/SCTE 77, ANSI Tier 22
Dimensions:
3/8-16 UNC
STAINLESS STEEL
PENTA HEAD BOLT
W/ WASHER (2)
e
1/2- (13)
4" (102)
PULL SLOT
COVER
(g1)
.5 COF SKID
RESISTANT SURFACE
EQUIVALENCY REFERENCE:
Quazite Precast Polymer Concrete Cover, Part # PG1730HHOOP
SPECIFICATIONS ITEM NO. 2
Precast Polymer Concrete Pull Box, 12"x 12"x 12"
Specifications
Description: Heavy Duty w/ Open Bottom and Lifting Bolts
Composition: Polymer Concrete
Load Rating: Design, 15,0001bs / Test Loading, 22,500 lbs
Compliance: UL listed,
ANS1/SCTE 77, ANSI Tier 15
Dimensions:
EQUIVALENCY REFERENCE:
Qua zite Precast Polymer Concrete Box, Part # PC1212BA12
40
SPECIFICATIONS ITEM NO. 1
Precast Polymer Concrete Pull Box Cover, 12"x 12"
Specifications
Description: Heavy Duty w/2 Bolts
Composition: Polymer Concrete
Logo: TRAFFIC SIGNAL
Load Rating: Design, 15,0001bs / Test Loading, 22,500 lbs
Compliance: UL listed,
ANS1/SCTE 77, ANSI Tier 15
Dimensions:
3/8-16 UNC
STAINLESS STEEL
HEX HEAD BOLT
W/ WASHER (2)
a
XGIV12([i
1/2" (13) X 2" (51)
PULL SLOT
5 COF SKID RESISTANT SURFACE
EQUIVALENCY REFERENCE:
Qua zite Precast Po lyme r Co n c rete Cover, Part# PG1212HA00