BIL 152 Draft 02 2022-2024 - Laserfiche WebLink

Home

(e) Application for [model] plan pre -approval, (1) To apply for pre -approval of a [model] plan, [three sets efl complete working drawings and specifications that bear the [wet] seal and signature of a person who is licensed in the State of Hawaii as an architect or professional structural engineer shall be submitted to the authority having jurisdiction. TqTU_rVrMTrVU _UT ndix U of chapter , i[i1143L11 [1U114i111g eVUV. (3)] Q A plan review fee for pre -approved [me"] plans shall be assessed per [medelhome .lo., gi ] plan in accordance with section 5-7-2. (d) The authority having jurisdiction shall approve the application, and assign a model number to the pre -approved [model] plan, if it finds that: (1) The plans submitted for pre -approval conform with the requirements of the construction code and with all other applicable laws; and (2) The fees specified in section 5-7-2 have been paid. (e) Expiration of [model-] plan pre -approval. Pre -approved [mo"] plans [ ] shall remain valid until a new edition of the [ma"I building code is adopted by the authority having jurisdiction. (f) Owner/contractor application for permit. (1) When applying for a permit with a pre -approved plan [for a tned l hemee design] the owner/contractor shall: (A) Submit [twe-sets-of] complete working drawings showing the pre - approved model number along with the manufacturer's [wet] seal and authorizing signature. The authority having jurisdiction will verify the seal and signature, (B) Pay the permit plan review fee pursuant to section 5-7-1. (C) Obtain required approvals from other departments or agencies. (2) Construction drawings for pre -approved [model home desig„sfl plans __� with the exception of the plot plan and/or cover sheet will not be required to be individually stamped by a person who is licensed in the State of Hawaii as an architect or professional structural engineer in accordance with this chapter and chapter 464, Hawaii Revised Statutes. The plot plan and/or cover sheet shall bear the same architect or professional engineer's [wet] seal [er] and signature as submitted on the pre -approved [medel 1,,,me design, plan, pursuant to subsection (c)(1), (3) After the requisite approvals from other departments or agencies have been obtained, the authority having jurisdiction will either approve the application or inform the applicant of deficiencies in the application within six working days after the authority having jurisdiction receives notice that all approvals have been obtained. (4) Once approved, the authority having jurisdiction shall issue the permit in accordance with section 5-5-1." N