COM 0774.000 2000-2002 - Laserfiche WebLink

Home

(b) When two identical sign faces are placed back to back, so that both faces cannot be viewed from any point at the same time, and when such sign faces are part of the same sign structure and are not more than [42] 12 inches apart, the sign area shall be computed by the measurement of one of the faces. Division 4. Sign Regulations Section 3-7. Type, number, and size of signs permissible. (a) Only signs of the type, number, and size prescribed in this article[, which conform to this article, ]will be permitted to be erected or maintained. (b) Sign type, number, and size restrictions shall be applied per lot or, if the lot is occupied by multiple businesses, per business establishment, or if a business occupies multiple adjacent lots, per business establishment. These restrictions shall be subject to the following provisions: (1) The total number of signs per lot or business shall not exceed two per adjacent [dedicated] street; and note: word taken out per Engr suggestion (2) Each of the two signs allowed per adjacent [dedicated] street shall be of a different sign type. note: word taken out per Engr suggestion Q_Only one ground sign shall be permitted per lot, even if the lot is occupied by multiple businesses. (See Sec. 3-11, 3-12(a) and 3-13(a) for size (c) In the event that the applicant has obtained a special permit or a use permit, or if the applicant is otherwise legally permitted to conduct activities not normally allowed in that district, the type and number of signs shall conform to requirements of the district within which [the use would generally be allowed]the activi T is occurring. Note this change supports the integrity of the three different types of districts. Section 3-8. Signs prohibited in all districts. (a) No person shall erect or maintain: 10