Laserfiche WebLink
larger light line or area, all of the area circumscribed by a light line or area shall <br /> be included in the dimensions. <br /> (3) If a sign consists only of words, designs, or figures engraved, painted, projected, <br /> or fixed on a wall, the total area of the sign shall be the sum of the square-foot <br /> areas of the rectangles or circles, whichever is smaller, within which [each] all <br /> words, designs or figures can be placed or inscribed. <br /> Section 3-6. Multifaced signs. <br /> (a) The sign area for a sign with more than one face shall be computed by adding together <br /> the area of all sign faces [visible from any one point]. <br /> (b) When two identical sign faces are placed back to back, so that both faces cannot be <br /> viewed from any point at the same time, and when such sign faces are part of the same <br /> sign structure and are not more than [42] 12 inches apart, the sign area shall be <br /> computed by the measurement of one of the faces. <br /> Division 4. Sign Regulations <br /> Section 3-7. Type, number, and size of signs permissible. <br /> (a) Only signs of the type, number, and size prescribed in this article[, which conform to <br /> this article, ]will be permitted to be erected or maintained. <br /> <br /> (b) Sign type, number, and size restrictions shall be applied per lot or, if the lot is occupied <br /> by multiple businesses, per business establishment. These restrictions shall be subject <br /> to the following provisions: <br /> (1) The total number of signs per lot or business shall not exceed two per adjacent <br /> dedicated street; and <br /> (2) Each of the two signs allowed per adjacent dedicated street shall be of a different <br /> sign type. <br /> s <br /> <br />