Laserfiche WebLink
Street Light Notes, cont'd <br />7. Transformer Bases shall use leveling shims Hapco part # 51432-001 or approved <br />equal. Leveling nuts can be used as approved by the Traffic Division. <br />8. Wooden Poles: <br />• 35' in length; <br />• Southern Yellow Pine or Douglas Fir; <br />• Class III; <br />• Penta -treated per AWPA Use Category System, UC4B; and <br />• Commodity Specification D. <br />9. Wire: <br />• #12 -AWG RHW-stranded copper wire; <br />• Size shall be per plan; and <br />• White tape wrap denoting neutral shall be a minimum of 12" on the street light side <br />and 4' on the secondary tapped (HELCO) side. <br />REFERENCES: <br />1. When specific street light information is not covered is this document, refer to the <br />HDOT 2008 Specifications, the 2005 Standard Plans, or contact the Traffic Division <br />at 808-961-8341. <br />*NOTE: ALL WORK SHALL CONFORM TO THE LATEST EDITION OF THE <br />NATIONAL ELECTRICAL CODE (NEC). <br />Dated: 15 -Oct -19; supersedes all previous versions. <br />Page 4 of 4 <br />