Laserfiche WebLink
Street Light Notes, cont'd <br />2. Street light fixtures: Shall be compliant with the current edition of the County of Hawaii <br />Outdoor Lighting Ordinance and approved by the Traffic Division. <br />LED Luminaries: <br />E2 Lighting: <br />E2-H150-ST-35W-7PD-SF, 35 W <br />E2-H150-ST-70W-7PD-SF, 70 W <br />E2-H150-ST-85W-7PD-SF, 85 W <br />3. Photoelectric cells: Completely solid state, Fail "On", Fisher Pierce: FP -7790B -SPS <br />4. Aluminum Poles: Shall be approved by the FHWA and comply with the current edition <br />of the AASHTO Street Lighting Standard Specifications for Structural Supports for <br />Highway Signs, Luminaires, and Traffic Signals. The poles shall have the following: <br />• 0.188" minimum wall thickness; <br />• 12" pole mount -base bolt pattern; <br />• Internal mounted vibration damper; <br />• Arm length shall be per plan (see below); and <br />• All exposed surfaces shall be powder coated gray finish (Any other finish shall be <br />approved by the Traffic Division). <br />Pole Types: <br />Hapco: Single mast arm assembly Part# RTA30D8BFM1*-GC or approved equal. <br />*Mast arm length is 8' or 10'. <br />Hapco: Single truss arm assembly Part# RTA30D8BFT1*-GC or approved equal. <br />*Truss arm length is 12' or 15'. <br />5. Anchor Bolts: Use galvanized steel anchor bolts. <br />6. Transformer Bases: Shall be approved by the FHWA and comply with the current <br />edition of the AASHTO Break -Away Specifications. The transformer bases shall <br />have the following: <br />• Aluminum; <br />• All exposed surfaces shall be powder coated gray finish (any other finish shall be <br />approved by the Traffic Division) and <br />• 14" foundation base bolt circle. <br />Types: <br />Hapco: 70501 (T131-17). <br />Valmont: M093 (T131-17) <br />Page 3 of 4 <br />