TMK 7-5-004-007 - KVDC Design - Niumalu Marketplace - Security Fence

Home

December 23, 2020 Page 3 We have also attached 2 renderings showing the view of the proposed safety fencing along QKH (See attached "Rendering One"), in addition to the view of the proposed safety fencing along the mauka Henry Street corridor (See attached "Rendering Two"), as we felt it important to show the Planning Department and the KVDC the look of the safety fencing in these areas, as they are adjacent to heavily traveled thoroughfares. As you will see from the renderings, the landscaping at full grow out will provide sufficient buffering of the safety fencing, and for the most part, will blend into the background. In those areas where there is some minimal exposure of the safety fencing, we understand that due to the spacing of the pickets, there is adequate visibility that will minimize the impacts to the makai view planes. Although the slope is less severe along the makai portion of the Project, there are still fall risk hazards present due to the sloping nature of the property. Similar to the QKH and Henry Street situation along the mauka boundary of the Property, our client constructed another varying 1 to 2 -foot tall CRM wall to form the boundary of the parking lot below Building 10 and Building Pad 13, although the CRM wall is set back at its closest point to the Henry Street right- of-way at approximately 82 feet. The grade separation makai of this CRM wall is approximately 6 to 14 feet, and our client would like to install a 4 -foot tall safety fence on the top of this wall to mitigate the fall risk hazard potential. The proposed safety fencing will also be similarly buffered by landscaping. Specifically, our client is proposing to installing the following: 1. Approximately 83 lineal feet of aluminum picket fence on top of the CRM wall fronting the mauka portion of Henry Street in the area identified as "(22)" on Sheet L -100B. Please also refer to (2/L100) "Typical Black Powder Coated Fence Section" for the typical details of construction. 2. Approximately 58 lineal feet of aluminum pick aluminum picket fence on top of the CRM wall in the area identified as "(23)" on Sheet L -100B. Please also refer to (2/L100) "Typical Black Powder Coated Fence Section" for the typical details of construction. Thank you for your attention to this matter. We respectfully request that the Planning Department schedule our Application for Design Review before the KVDC during its next meeting on January 14, 2021. We have also enclosed a completed Application for Design Review and the associated Fee Owner's Authorization that allows us to execute and process the enclosed request with the Planning Department and the KDVC. Please do not hesitate to contact my paralegal Jason Knable at 808-935-6644, should you have any questions or concerns, or if you require additional information. Thank again. Sincerely, "ven S.C. Lim cc: Kona Owner, LLC 4825-6520-1619.1.069084-00001