Laserfiche WebLink
(B) Supports. Horizontal runs of FMC supported by openings <br />Through framing members at intervals not greater than <br />1.4 m (412 ft.) and securely fastened within 300 mm (12 in.) <br />Of termination points shall be permitted. <br />352 Rigid Polyvinyl Chloride Conduits: Type PVC <br />II. Installation 352.10 Uses Permitted. The use of PVC conduit shall be permitted in <br />accordance with 352.10(A) through (H). <br />(F) Exposed. PVC conduit shall be permitted for exposed work. PVC conduit used exposed <br />in areas of physical damage shall be identified for the use. FPN: PVC Conduit, Type <br />Schedule 80, is identified for areas of physical damage. <br />(G) Underground Installations. For underground installations, homogenous and <br />nonhomogeneous PVC shall be permitted for direct burial and underground encased in <br />concrete. See Table 300.5 and 300.50. <br />352.12 Uses Not Permitted. PVC conduit shall not be used <br />Under the conditions specified in 352.12(A) through (F). <br />(C) Physical Damage. Where subject to physical damage <br />Unless identified for such use. <br />352.30 Securing and Supporting. PVC conduit shall be <br />Installed as a complete system as provided in 300.18 and shall <br />Be fastened so that movement from thermal expansion or contraction <br />Is permitted. PVC conduit shall be securely fastened <br />And supported in accordance with 352.30(A) and (B) or permitted <br />To be unsupported in accordance with 352.30(C). <br />