ORD 2024-045 2022-2024 - Laserfiche WebLink

Home

(c) Application for [Riedel] plan pre-approval. (1) To apply for pre-approval of a [model] plan, [three-sets-of] complete working drawings and specifications that bear the [wet] seal and signature of a person who is licensed in the State of Hawai`i as an architect or professional structural engineer shall be submitted to the authority having jurisdiction. [(2) Factory built homes shall include a manufacturer's label as required by Appendix U of chapter 5B,the residential building code. (3)] (2) A plan review fee for pre-approved [model] plans shall be assessed per [model home design] plan in accordance with section 5-7-2. (d) The authority having jurisdiction shall approve the application, and assign a model number to the pre-approved [Riedel] plan, if it finds that: (1) The plans submitted for pre-approval conform with the requirements of the construction code and with all other applicable laws; and (2) The fees specified in section 5-7-2 have been paid. (e) Expiration of[model] plan pre-approval. Pre-approved [Riedel] plans [for home designs] shall remain valid until a new edition of the [Riedel] building code is adopted by the authority having jurisdiction. (f) Owner/contractor application for permit. (1) When applying for a permit with a pre-approved plan [for a model home design] the owner/contractor shall: (A) Submit [two sets-ef] complete working drawings showing the pre- approved model number along with the manufacturer's [wet] seal and authorizing signature. The authority having jurisdiction will verify the seal and signature. (B) Pay the permit plan review fee pursuant to section 5-7-1. (C) Obtain required approvals from other departments or agencies. (2) Construction drawings for pre-approved [model home designs,] plans, with the exception of the plot plan and/or cover sheet will not be required to be individually stamped by a person who is licensed in the State of Hawai`i as an architect or professional structural engineer in accordance with this chapter and chapter 464, Hawai`i Revised Statutes. The plot plan and/or cover sheet shall bear the same architect or professional engineer's [wet] seal [er] and signature as submitted on the pre-approved [model home design,] plan, pursuant to subsection(c)(1). (3) After the requisite approvals from other departments or agencies have been obtained, the authority having jurisdiction will either approve the application or inform the applicant of deficiencies in the application within six working days after the authority having jurisdiction receives notice that all approvals have been obtained. (4) Once approved, the authority having jurisdiction shall issue the permit in accordance with section 5-5-1." 2