Ordinance 07-084 - Laserfiche WebLink

Home

(94) Amending Section 906.6. Section 906.6 is amended by adding: "For pre - fabricated flashings — Sheet lead shall be at least two and one -half (2.5) pounds per square foot." (95) Amending Section 910.6. Section 910.6 is amended by changing the last sentence to read: "An accessible cleanout shall be installed in the above -floor portion of each vent for the combination waste and vent system." (96) Adding Section 911.0. Section 911.0 is added to read: "Section 911.0 Single -stack System. When approved by the administrative authority, a single -stack system based on engineered studies and testings may be used in lieu of other related provisions in this code. Plans and specifications of such systems shall be prepared and stamped by a licensed professional engineer or architect." (97) Adding Section 1014.11. Section 1014.11 is added to read: "1014.11 Each grease trap or interceptor shall have at least twelve (12) inches clearance above the cover for inspection and maintenance." (98) Deleting Chapter 11. Chapter 11 Storm Drainage is deleted. (99) Amending Section 1201.0. Section 1201.0 is amended by adding at the end thereof: "Compliance with the National Fire Protection Association (NFPA) Standard No. 54 -1996, National Fuel Gas Code will be deemed equivalent to meeting requirements of the Uniform Plumbing Code." (100) Amending Section 1204.3.2. Section 1204.3.2 is amended by adding at the end thereof a sentence to read: "The administrative authority may accept the use of any testing apparatus which has been approved by a nationally recognized testing laboratory in lieu of the foregoing air pressure test." 35