BIL 246 Draft 01 2004-2006 - Laserfiche WebLink

Home

(a) In preparing the final plat, all engineering and surveying work shall be made by or under the supervision of an engineer and surveyor, respectively. (b) The scale and sheet size utilized on this drawing shall be the same as required under section 23-59, and dedication or other written material shall be submitted on supplemental sheets. (c) If the final plat, following approval by the director, is to be filed with the land court for recordation, it shall comply with all requirements specified under the rules of the land court for land court subdivisions. Section 23-69. Information required on final plat. In addition to any other information required to be shown thereon under provisions of any State statute or County ordinance the following information shall be shown on the final plat and supplemental sheets: (1) Date, northpoint and scale of drawing; (2) Legal description of the tract boundaries; (3) Names and addresses of the owner, subdivider, and engineer, or surveyor who prepared the plat; (3j]~ Reference points of existing surveys identified, related to the plat by distances and azimuths, and reference to a field book or map as follows: (A) All stakes, monuments or other evidence found on the ground and used to determine the boundaries of the subdivision; (B) Adjoining corners of all adjoining subdivisions; (C) Boundary lines and grants within and adjacent to the plat; (D) Whenever the County has established the centerline of a street, adjacent to or within the proposed subdivision, the location of this line and monuments found or reset; (E) All other monuments found or established in making the survey of the subdivision or required to be installed by provisions of this chapter; [(~j]~ Tract boundary lines, right-of--way lines of streets: lot and block lines with dimensions, azimuths or deflection angles and radii, arcs, points of curvature and tangent bearings shall be shown; 9